![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |

ELASTOSPRAY®
ELASTOSPRAY® Polyurethane Foam Roofing Systems
The lowest lifecycle cost roof
Imagine a roof that makes the whole building better. One that provides 20 years or more of leak-free service with almost no maintenance. One that can stand up to the worst Mother Nature can throw at it.
A sustainable roof that offers both the lowest lifecycle cost and a low environmental impact.
ELASTOSPRAY® high performance polyurethane foam roofing systems:
- Apply directly to existing substrate in 95% of retrofit applications, eliminating tear-off costs and material sent to landfill
- Offer industry-leading wind uplift and severe hail resistance
- Are seamless, fully-adhered and self-flashing
- Provide superior insulation performance
- Require no fasteners for quicker installation and the elimination of thermal bridging
- Are renewable with simple recoating
Compare ELASTOSPRAY® with traditional systems
High – no tear off, renewable, low waste |
Medium – major construction, tear-off required |
Low – non-renewable, tear-off required |
|
High – reflective, reduced urban heat island, highest insulation R-value, no thermal bridging |
Low – non-reflective, elevated rooftop temperatures, lower insulation R-value, thermal bridging through fasteners |
Low – elevated rooftop temperatures, lower insulation R-value, thermal bridging through fasteners |
|
100% – water cannot migrate through closed-cell foam |
Joints and seams allow water migration, leaks hard to locate |
Joints and seams allow water migration, leaks hard to locate |
|
100% – monolithic, highest wind uplift resistance, no thermal bridging |
Numerous fasteners required, aggregate becomes projectiles in high winds |
Numerous fasteners required |
|
High – no tear-off required, conforms to irregular shapes, low labor cost |
Low – major construction, tear-off required, irregular shapes difficult |
Low – flashings difficult, numerous fasteners add labor cost |
|
High – 20 to 30 years |
High – 20 years |
Medium – 10+ years |
|
Minimal – renewable with simple recoats |
Costly and frequent – major reconstruction, leaks difficult to locate and repair |
Non-Renewable – must be torn off at end of lifecycle, difficult to inspect and repair |
- General Information
-
Copyright 2017