ENERTITE® is a low-density, open-cell spray polyurethane foam (SPF) insulation that provides air sealing, sound absorption and thermal insulation, allowing you to better control your indoor environment and create more energy efficient, comfortable and healthier homes and buildings. Applied as a liquid, this water-blown foam quickly expands to many times its original size, completely filling wall and roof cavities. ENERTITE® easily seals difficult-to-reach areas such as corners and around pipes and wiring to create a seamless seal against air movement.
WALLTITE® is a closed-cell spray polyurethane foam (SPF) insulation that creates a seamless, insulating air barrier to improve the energy efficiency, comfort and durability of homes and buildings. Spray applied as a liquid, WALLTITE flows in and around difficult to reach areas, creating a airtight seal.
SKYTITE® high-performance roofing systems provide seamless, leak-free protection from the elements with some of the highest wind uplift and hail resistance ratings in the industry. Spray-applied, the exterior low-slope roofing systems are self-flashing and easily conform to unusual shapes. SKYTITE can be applied to existing substrates, eliminating the need to costly tear-offs and reducing waste in landfills.
Spray polyurethane foam (SPF) can be used in applications from the ground up. Learn about the types of residential spray foam applications and their benefits.
Spray Foam Applications for Commercial Buildings
ENERTITE® is a low-density, open-cell spray polyurethane foam (SPF) insulation that provides air sealing, sound absorption and thermal insulation, allowing you to better control your indoor environment and create more energy efficient, comfortable and healthier homes and buildings. Applied as a liquid, this water-blown foam quickly expands to many times its original size, completely filling wall and roof cavities. ENERTITE® easily seals difficult-to-reach areas such as corners and around pipes and wiring to create a seamless seal against air movement.
ENERTITE provides affordability in a spray foam with features that outperform traditional insulation systems.
| R-Value (per inch) | 3.7-4.1 per inch |
| Approved Air Barrier | Yes - at 3.5" thickness |
| Air Leakage | Meets <0.02@3.5" thickness (Air Impermeable Insulation) |
| Noise Reduction Coefficient | 0.55 |
| Seamless Application | Yes |
| Fully Adheres | Yes |
| Fills Difficult Spaces | Yes |
| Superior Sound Barrier | Yes |
Unlike typical insulation, both types of spray foam provide air sealing and insulation in a single product, which helps make your home quieter, more comfortable and energy efficient. However, closed cell spray foam also has almost twice the R-value (insulating value), adds structural strength, controls transfer of moisture vapor, and is a FEMA approved flood damage resistant material. These characteristics improve the durability and resiliency of your home against storms and moisture damage.
Fully cured spray foam properly installed in an appropriately ventilated space typically leaves little if any discernable smell. As an open-cell foam, the material can retain residual odors if recommended application and ventilation procedures are not followed. Odor is a fairly subjective property and many products are often used during construction that can emit an odor. Products like caulks and sealants, paints and finishes, cabinets and carpets can all have odors that some may errantly attribute to spray foam after installation. Also during retrofit situations, existing materials may be disturbed that contribute odors to and around the installation area.
No, BASF spray foam is not injectable. Obstructions in the wall could block the flow of the foam material or create pressure buildup of the expanding foam. For these reasons it should be sprayed into open wall, roof, or floor cavities to ensure complete coverage. If you’re looking to make your home or building more comfortable and energy efficient, unfinished basements and attics are excellent places to consider having spray foam installed.
